TM 1-1520-238-23
2-404
Change 6
2.112.
VERTICAL STABILIZER HANDHOLD STEPS REMOVAL/INSTALLATION – continued
2.112.4. Cleaning
a. Clean sealing compound residue (para 1.47).
b. Wipe removed and attaching parts with a
clean rag.
2.112.5. Inspection
a. Check handhold step tubes for stripped
threads, bends, and excessive wear. None al-
lowed.
b. Check handhold step tubes for corrosion
(para 2.103).
2.112.6. Installation
a. Install tube (1) on stabilizer (2).
(1) Install spring (6) into fixed tube (5).
(2) Insert tube (1) into fixed tube (5).
(3) Apply primer to screw (4). Use primer coating
(item 147, App F).
(4) Apply sealing compound to screw (4). Use
sealing compound (item 168, App F) or
sealing compound (item 170B, App F).
(5) Aline screw (4) with slot (7) at corner in fixed
tube (5).
(6) Install screw (4) in tube (1). Tighten to ensure
freedom of handle.
(7) Lock tube (1) in fixed tube (5). Push on tube
(1). Turn key (3) clockwise to lock.
b. Inspect (QA).
c. Install access fairings L510, R510, L530, and
L540 (para 2.2).
END OF TASK
6
M04-2030-3
5
7
4
2
1
3
