TM 1-1520-238-23
2-407
2.113.
HORIZONTAL STABILATOR REMOVAL/INSTALLATION – continued
b. Remove motional transducer (8) from stabila-
tor (2).
(1) Remove screw (9), washer (10), loop clamps
(11) and (12), and spacer (13).
(2) Remove tie strap (14).
(3) Detach receptacle J1076 (15) from connector
P1076 (16).
(4) Remove screw (17) and washer (18) from
sensor clamp (19).
(5) Remove two screws (20) and washers (21)
from sensor bracket assembly (22), shim
(23), and stabilator (2).
(6) Remove transducer (8) from stabilator (2).
c. Insert rig pin (24) through rig pin holes (25)
and (26).
GO TO NEXT PAGE
9
11
12
10
16
M04-2028-13
17
18
13
21
20
19
22
23
15
14
8
2
M04-2028-18
25
26
24
