TM 1-1520-238-23
2-456
Change 7
2.127.
TAILBOOM CLOSEOUT FAIRING ACCESS COVERS REMOVAL/INSTALLATION – continued
2.127.3. Removal
a. Remove tailboom closeout access covers (1)
and (2) from tailboom frame (3).
(1) Remove two screws (4) and washers (5) from
top of covers (1) and (2).
(2) Remove five screws (6) and washers (7) from
front of cover (1).
(3) Remove 16 screws (8) and washers (9) from
sides of covers (1) and (2).
(4) Remove covers (1) and (2) from frame (3).
2.127.4. Cleaning
a. Wipe removed and attaching parts and sur-
faces with a clean rag.
2.127.5. Inspection
a. Check cover for cracks (para 2.11).
b. Check frame for corrosion (para 1.49).
c. Check frame for cracks.
(1) If cracks are suspected, perform nondestruc-
tive inspection (TM 1-1520-264-23).
NOTE
Steps d. and e. refer to aircraft equipped
with electromagnetic interference (EMI)
provisions.
d. Check fairings and mating surface for loose
or damaged EMI gasket (para 2.1).
e. Check fairing mating surface for damaged or
worn EMI tape or conductive coating (para
2.1).
GO TO NEXT PAGE
2
3
5
4
M04-2026-2
1
7
6
1
M04-2026-3
2
9
8
3
