TM 1-1520-238-23
2-454.10
Change 5
2.126E. MAIN ROTOR SHAFT FAIRING T205L OR T205R REMOVAL/INSTALLATION – continued
2.126E.3. Removal
NOTE
Perform step a. for fairing without laser
detecting sensor unit mount installed, or
perform step b. for fairing with laser de-
tecting sensor unit mount installed
(ADP).
a. Remove main rotor shaft fairing (1) from lon-
geron (2).
(1) Unlock five or six fasteners (T205R or T205L)
(3) from fairing (1).
(2) Remove eleven screws (4) and washers (5),
from fairing (1) and longeron (2).
(3) Remove fairing (1).
b. Remove main rotor shaft fairing (1) from lon-
geron (2).
(1) If installed, remove laser sensor mount cover
plate (8) and disconnect connector (9)
(P1103 for left side or P1101 for right side).
(a) Remove eight screws (6) and washers (7).
(b) Disconnect connector (9).
(2) Unlock five or six fasteners (T205R or T205L)
(3) from fairing (1).
(3) Remove thirteen screws (4) and washers (5),
from fairing (1) and longeron (2).
(4) Remove fairing (1).
GO TO NEXT PAGE
4
5
4
1
3
5
3
5
4
4
5
6
7
9
8
1
2
ADP
M04-5189-2
