TM 1-1520-238-23
2-454.12
Change 5
2.126E. MAIN ROTOR SHAFT FAIRING T205L OR T205R REMOVAL/INSTALLATION – continued
2.126E.6. Installation
NOTE
Perform step a. for fairing without laser
detecting sensor unit mount installed, or
perform step b. for fairing with laser de-
tecting sensor unit mount installed
(ADP).
a. Install fairing (1) on longeron (2).
(1) Install fairing (1) on longeron (2).
(2) Install eleven screws (4) through washers (5),
fairing (1), and longeron (2).
(3) Lock five or six fasteners (T205R or T205L)
(3) on fairing (1).
b. Install fairings (1) on longeron (2).
(1) Install fairing (1) on longeron (2).
(2) Install thirteen screws (4) through washers
(5), fairing (1), and longeron (2).
(3) Lock five or six fasteners (T205R or T205L)
(3) on fairing (1).
(4) If required, connect connector (9) (P1103 for
left side or P1101 for right side) and install
laser sensor mount cover plate (8).
(a) Connect connector (9).
(b) Install eight screws (5) and washers (4).
c. Inspect (QA).
d. Secure access cover T250L and fairing T225
(para 2.2).
e. If required, install forward left or right laser
detecting sensor unit (TM 11-1520-238-23-1).
END OF TASK
4
5
4
1
3
5
3
5
4
4
5
6
7
9
8
1
2
ADP
M04-5189-3
