TM 1-1520-238-23
2-486
2.133.
NO. 1 ENGINE NACELLE REMOVAL/INSTALLATION – continued
s. Install wire harness W211 (1) on firewall (2).
(1) Aline wire harness W211 (1) with firewall (2).
(2) Install two screws (3), washers (4), and
spacer (5) through wire harness (1) on fire-
wall (2).
t. If nacelle is being reinstalled, go to step ab.
u. If nacelle is being replaced, go to step v.
v. Adjust nacelle rod (90) and link (91).
(1) Install adjusting tool (92) to forward engine
mount (93) and aft engine mount (94). Use
adjusting tool.
(2) Adjust rod (90) and link (91) by lengthening or
shortening until ball support pin (95) can be
freely inserted through tool (92), rod (90), and
link (91).
w. Torque nut (96) to 100 INCH-POUNDS. Use
torque wrench.
x. Torque nut (97) to 35 INCH-POUNDS. Use
torque wrench.
y. Lockwire nut (96) to tab washer (98). Use wire
(item 226, App F).
z. Lockwire nut (97) to land (99) and nut (100).
Use wire (item 226, App F).
GO TO NEXT PAGE
M04-4109-43
5
6
1
4
3
2
6
1
4
3
2
95
99
90
91
96
98
97
100
93
92
94
TOOL REMOVED FOR
CLARITY
M04-4109-44
