TM 1-1520-238-23
2-490
2.134.
NO. 2 ENGINE NACELLE REMOVAL/INSTALLATION – continued
2.134.3. Removal
a. Remove wire harness W102 (1) from firewall
(2).
(1) Remove two screws (3) and washers (4) from
clamps (5).
(2) Remove two tiedown straps (6) from tiedown
mounting base (7) on firewall (2).
(3) Remove screw (8), two washers (9), and nut
(10) from firewall (2).
(4) Remove wire harness W102 (1) and reposi-
tion away from firewall (2).
b. Remove wire harness W108 (11) and W266
(12) from firewall (2).
(1) Remove screw (13), washer (14), and spacer
(15) from two clamps (16) and (17).
(2) Remove wire harnesses W108 (11) and
W266 (12) and reposition away from firewall
(2).
GO TO NEXT PAGE
M04-4112-1
5
1
2
M04-4112-2
6
7
1
2
8
9
1
2
10
4
3
2
16
14
13
M04-4112-3
12
11
15
17
