TM 1-1520-238-23
2-498
Change 2
2.134.
NO. 2 ENGINE NACELLE REMOVAL/INSTALLATION – continued
(3) Remove two bolts (85), four washers (86),
and two nuts (87) from bottom section of sup-
port (78).
(4) Remove nacelle (56) from supports (68) and
(78).
2.134.4. Cleaning
a. Wipe removed and attaching parts and sur-
faces with a clean rag.
2.134.5. Inspection
a. Check nacelle for damage (para 2.128).
b. Check nacelle and support mating surfaces
for damaged EMI conductive coating. Repair
door and mating surface (para 2.34).
2.134.6. Installation
a. Lift and aline nacelle (56) with supports (68)
and (78).
b. Install nacelle (56) on support (78). Torque
bolts (79), (82), and (85) to 110 INCH-POUNDS.
(1) Install four bolts (79) through eight washers
(80), top of nacelle (56), and support (78).
(2) Install four nuts (81).
(3) Torque four bolts (79) to 110 INCH-POUNDS.
Use torque wrench.
(4) Install two bolts (82) through four washers
(83), middle section of nacelle (56), and sup-
port (78).
(5) Install two nuts (84).
(6) Torque two bolts (82) to 110 INCH-POUNDS.
Use torque wrench.
GO TO NEXT PAGE
78
87
M04-4112-23
85
56
86
78
56
79
81
80
M04-4112-24
78
84
56
M04-4112-25
82
83
