TM 1-1520-238-23
2-500
Change 2
2.134.
NO. 2 ENGINE NACELLE REMOVAL/INSTALLATION – continued
(7) Install two bolts (75) through four washers
(76), bottom section of nacelle (56), and sup-
port (68).
(8) Install two nuts (77).
(9) Torque two bolts (75) to 110 INCH-POUNDS.
Use torque wrench.
d. Install two bolts (62) and bolt (65) on bottom
firewall (2). Torque two bolts (62) to 110 INCH-
POUNDS and bolt (65) to 225 INCH-POUNDS.
(1) Install two bolts (62), four washers (63), and
two nuts (64) on firewall (2).
(2) Torque two bolts (62) to 110 INCH-POUNDS.
Use torque wrench.
(3) Install bolt (65), two washers (66), and nut
(67) on firewall (2).
(4) Torque bolt (65) to 225 INCH-POUNDS. Use
torque wrench.
e. Install nacelle (56) on post (57).
(1) Install four bolts (58) through washers (59),
top of nacelle (56), and post (57).
GO TO NEXT PAGE
77
68
76
75
56
M04-4112-29
M04-4112-30
2
65
62
64
63
66
67
PLACES
62
6364
TYPICAL 2
57
58
59
56
M04-4112-31
