TM 1-1520-238-23
Change 2
2-499
2.134.
NO. 2 ENGINE NACELLE REMOVAL/INSTALLATION continued
(7) Install two bolts (85) through four washers
(86), bottom section of nacelle (56), and sup-
port (78).
(8) Install two nuts (87).
(9) Torque two bolts (85) to 110 INCH-POUNDS.
Use torque wrench.
c. Install nacelle (56) on support (68). Torque
bolts (69), (72), and (75) to 110 INCH-POUNDS.
(1) Install four bolts (69) through eight washers
(70), top of nacelle (56), and support (68).
(2) Install four nuts (71).
(3) Torque four bolts (69) to 110 INCH-POUNDS.
Use torque wrench.
(4) Install two bolts (72) and four washers (73)
through middle section of nacelle (56) and
support (68).
(5) Install two nuts (74).
(6) Torque two bolts (72) to 110 INCH-POUNDS.
Use torque wrench.
GO TO NEXT PAGE
87
M04-4112-26
78
86
85
56
68
71
M04-4112-27
56
69
70
M04-4112-28
68
74
56
72
73