TM 1-1520-238-23
2-509
2.135.
ENGINE NACELLE FAIRING REMOVAL/INSTALLATION
2.135.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
2.135.2. Initial Setup
Tools:
Aircraft mechanic’s tool kit (item 376, App H)
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
4.120
No. 1 or No. 2 engine outboard secondary
nozzle removed
4.121
No. 1 or No. 2 engine inboard secondary
nozzle removed
4.122
No. 1 or No. 2 engine center secondary
nozzle removed
4.123
No. 1 or No. 2 engine secondary nozzle
structural support removed
4.124
No. 1 or No. 2 engine secondary nozzle up-
per support strut and clevis removed
NOTE
This task is typical for left and/or right
nacelle fairing.
2.135.3. Removal
a. Remove fairing (1) from engine nacelle (2).
(1) Remove 26 screws (3), 2 screws (4), 28
washers (5), and fairing (1) from nacelle (2).
2.135.4. Cleaning
a. Wipe removed and attaching parts and sur-
faces with a clean rag.
GO TO NEXT PAGE
M04-3548-1
4
5
1
5
3
M04-3548-2
2
