TM 1-1520-238-23
2-591
2.161.
PILOT/CPG ARMORED CREW SEAT REMOVAL/INSTALLATION – continued
b. Install seat (3) in station.
NOTE
One person directs angle of seat during
installation.
(1) Position seat (3) in station.
(2) Tilt seat (3) forward and hold in place.
(3) Install two lower quick-release pins (9).
NOTE
Ensure length of wire harness from clamp
to connector is 5 INCHES long.
(4) Install wire harness/bracket (6) in bracket (7).
(5) Install quick-release pin (5).
(6) Tilt seat (3) back and hold in place.
(7) Install two upper quick-release pins (8).
c. Install door cylinder assembly lower end (para
2.57 or 2.65).
d. Check seat (3) for proper operation.
e. Attach connector (1) P993 (pilot) or P997
(CPG) to receptacle (2) (A148)J1 (pilot) or
(A147)J1 (CPG).
f. Inspect (QA).
g. Install
helmet
display
unit
(HDU)
(TM 9-1270-221-23).
END OF TASK
M04-1275-6
8
3
9
12
ROTATED FOR CLARITY
M04-1275-8
6
7
5
