TM 1-1520-238-23
2-592
Change 3
2.162.
PILOT/CPG CANTED BULKHEAD SEAT FITTING BEARING REPLACEMENT
2.162.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
2.162.2. Initial Setup
Tools:
Airframe repairman’s tool kit (item 377, App H)
Light duty laboratory apron (item 27, App H)
6-inch C clamp (item 61, App H)
Chemical protective gloves (item 154, App H)
Hand operated arbor press (item 234, App H)
Universal puller kit (item 243, App H)
Adjustable air filtering respirator (item 262, App H)
Materials/Parts:
Brush (item 34, App F)
Cellophane (item 41, App F)
Cloth (item 52, App F)
Methyl ethyl ketone (item 124, App F)
Sealing compound primer (item 146, App F)
Sealing compound (item 175, App F)
Tape (item 203, App F)
Personnel Required:
68G
Aircraft Structural Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
References:
TM 55-1500-322-24
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
2.161
Pilot or CPG armored crew seat removed
NOTE
This task is typical for pilot/CPG left and
right seat fitting bearings.
GO TO NEXT PAGE
M04-2560-1
