TM 1-1520-238-23
2-628
2.173.
PILOT/CPG ARMORED CREW SEAT RESTRAINT CONTROL ASSEMBLY
REMOVAL/INSTALLATION – continued
NOTE
Go to step e for -5 handle configurations.
e. Install control handle (4) and bracket (10) on
seat (2). Torque four nuts (11) to 23 INCH-
POUNDS.
(1) Position bracket (10) on seat (2).
(2) Install four screws (14) through bracket (10)
and seat (2).
(3) Install three washers (12), lug washer (13),
and four nuts (11).
(4) Torque four nuts (11) to 23 INCH-POUNDS.
Use torque wrench.
(5) Lockwire nut (11) to lug washer (13). Use wire
(item 226, App F).
f. Install control handle (4) on seat (2). Torque
two nuts to 23 INCH-POUNDS.
(1) Position control handle (4) on seat (2).
(2) Install two screws (9) through seat (2) and
control handle (4).
(3) Install washer (8), lug washer (6), and two
nuts (7) on screws (9).
(4) Torque two nuts (7) to 23 INCH-POUNDS.
Use torque wrench.
(5) Lockwire nut (5) to lug washer (6). Use wire
(item 226, App F).
g. Install seat cushion (3) on seat (2).
h. Pull handle (1) to move seat (2) to full up posi-
tion.
i. Check restraint control assembly for proper
operation.
j. Inspect (QA).
END OF TASK
M04-1274-13
14
2
4
12
10
11
13
12
11
8
2
4
9
6
M04-1274-10
2
7
5
M04-1274-11
3
2
1
