TM 1-1520-238-23
2-633
2.174.
PILOT/CPG ARMORED CREW SEAT SHOULDER HARNESS AND INERTIA REEL
REMOVAL/INSTALLATION – continued
c. Install reel (8) on seat (2). Torque four nuts (13)
to 20 INCH-POUNDS.
(1) Install four bolts (12) through seat (2) and reel
(8).
(2) Hold four bolts (12). Install four washers (14)
and nuts (13).
(3) Install cable (7) in key hole (11).
(4) Install slotted washer (10) over cable (7).
(5) Install knurled nut (9) on reel (8).
(6) Hold four bolts (12). Torque four nuts (13) to
20 INCH-POUNDS. Use torque wrench.
d. Inspect (QA).
e. Install seat cushions (3) and (4) on seat (2).
f. Move both engine power levers (5) to OFF
position.
g. Tilt back pilot/CPG armored crew seat and
install wire harness (para 2.161).
END OF TASK
2
14
13
M04-2286-10
12
10
9
11
7
8
8
3
4
M04-2286-12
2
M04-2286-14
5
