TM 1-1520-238-23
2-631
2.174.
PILOT/CPG ARMORED CREW SEAT SHOULDER HARNESS AND INERTIA REEL
REMOVAL/INSTALLATION – continued
f. Remove reel (8) from seat (2).
(1) Hold four bolts (12). Remove four nuts (13)
and washers (14).
(2) Remove four bolts (12) from seat (2) and reel
(8).
g. Remove shoulder harness strap (15) from reel
(8).
(1) Pull strap (15) out of reel (9) until it stops.
(2) Insert 7/32 key in hex fitting (16) and hold in
place.
(3) Push strap (15) and insert (17) in direction of
arrows.
(4) Turn reel (8) upside down and allow insert
(17) to fall out of shaft (18).
(5) Pull strap (15) out of shaft (18).
(6) Carefully relieve tension on shaft (18) inside
reel (9) by allowing 7/32 key to be rotated
clockwise.
h. Pull strap (15) through grommet (19).
GO TO NEXT PAGE
12
2
14
13
8
M04-2286-5
16
8
18
17
15
18
15
MO4-2286-6
19
FRONT
VIEW
15
M04-2286-7
