TM 1-1520-238-23
2-647
2.179.
NONTRANSPARENT BARRIER ARMOR PASS-THRU TRAY REMOVAL/INSTALLATION – continued
2.179.3. Removal
a. Enter pilot station (para 1.56). Observe all
safety precautions.
b. Remove pass–thru tray (1) from upper non-
transparent barrier assembly crew protection
armor (2).
(1) Remove three screws (3) and finishing wash-
ers (4) from tray (1).
(2) Remove tray (1) from armor (2).
2.179.4. Cleaning
a. Wipe removed and attaching surface with a
clean rag.
2.179.5. Inspection
a. Check attaching surface for excessive wear
(para 2.12).
2.179.6. Installation
a. Install tray (1) on armor (2).
(1) Aline tray (1) with five attachment points on
armor (2).
(2) Install three screws (3) and washers (4).
END OF TASK
2
3
4
1
M04-2143-3
2
3
4
1
M04-2143-4
