TM 1-1520-238-23
2-652
2.180.
TRANSPARENT CREW PROTECTION ARMOR BARRIER REPLACEMENT – continued
CAUTION
Do not damage transparent barrier or
pilot instrument panel when handling
or positioning barrier.
To prevent damage to transparent bar-
rier, ensure that all sharp edges or cor-
ners of structure are covered with
tape. Use tape (item 201, App F).
Do not damage canopy transparent
panels when performing maintenance
in or around pilot or CPG stations.
h. Remove barrier (26) from structure (2).
(1) Remove 11 nuts (7) and washers (8).
(2) Remove two nuts (19) and washers (20).
(3) Remove eight screws (9), two screws (21),
and two screws (35).
(4) Have assistant support weight of barrier (26)
from CPG station.
(5) Remove two screws (36). Lower barrier (26)
to clear upper channel (37) of structure (2).
(6) Tilt top of barrier (26) approximately 1.5
INCHES forward as barrier clears stop of up-
per channel (37).
(7) Place barrier (26) in suitable container to pre-
vent damage.
2.180.4. Cleaning
a. Clean structure (para 1.47).
b. Clean barrier. Use cloth (item 52, App F).
GO TO NEXT PAGE
M04-3437-8
7
2
8
9
35
36
35
9
21
9
7
26
8
8
19
8
7
8
7
8
37
20
TILT FORWARD
WHEN CLEAR
OF STRUCTURE
