TM 1-1520-238-23
Change 2
2-659
2.181D. ARMORED PANEL SEAL REMOVAL/INSTALLATION – continued
(3) Apply a thin uniform layer of adhesive on sur-
face of seal (1) and attaching area of panel
(2). Use adhesive (item 3, App F).
(4) Install seal (1) on panel (2) and press firmly
together.
(5) Cure for 24 HOURS at 75 F or cure for a
minimum of ONE HOUR at 200 10 F. Use
heater.
b. Remove tape from affected area.
c. Inspect (QA).
d. Install pilot left hand or right hand armored
side panel (para 2.181A), or install CPG left
hand or right hand armored side panel (para
2.181B), or install pilot left hand upper ar-
mored side panel (para 2.181C).
END OF TASK
M04-5139-3
1
2
