TM 1-1520-238-23
Change 1
3-51
3.16.
MAIN LANDING GEAR TRAILING ARM ASSEMBLY REMOVAL/INSTALLATION – continued
e. Remove spacer ring (17) from cross tube (9).
NOTE
Squat switch is on left trailing arm cap. If
left trailing arm is to be replaced, go to
step f. If right trailing arm is to be re-
placed, go to step g.
f. Remove squat switch bracket (18), cap (19),
packing (20), and retainer (21) from trailing
arm (3).
(1) Hold two bolts (22). Remove two nuts (23),
washers (24), and retainer (21) from bolts
(22).
(2) Remove two bolts (22), washers (24), switch
bracket (18), and cap (19) from trailing arm
(3).
(3) Remove and discard packing (20) from cap
(19).
g. Remove cap (25), packing (26), and retainer
(27) from trailing arm (3).
(1) Hold two bolts (28). Remove two nuts (29),
washers (30), and retainer (27) from bolts
(28).
(2) Remove two bolts (28), washers (30), and
cap (25) from trailing arm (3).
(3) Remove and discard packing (26) from cap
(25).
GO TO NEXT PAGE
M04-055-11
9
17
M04-055-12
19
20
2224
18
3
24
23
21
LEFT SIDE
M04-055-13
25
26
2830
3
30
29
27
RIGHT SIDE
