TM 1-1520-238-23
3-105
3.30.
REMOTE CONTROL LEVER SLEEVE BEARING REPLACEMENT
3.30.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
3.30.2. Initial Setup
Tools:
Aircraft mechanics tool kit (item 376, App H)
Light duty laboratory apron (item 27, App H)
Chemical protective gloves (item 154, App H)
Adjustable air filtering respirator (item 262, App H)
Materials/Parts:
Sleeve bearing
Epoxy primer coating kit (item 78, App F)
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
References:
TM 55-1500-322-24
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
3.29
Remote control lever removed
NOTE
This task is typical for bearing sleeves
installed four places on lever.
3.30.3. Removal
a. Remove and discard sleeve bearing (1) from
lever (2) (TM 55-1500-322-24).
3.30.4. Cleaning
a. Clean primer from bearing holes (para 1.47).
3.30.5. Inspection
a. Check lever for cracks. None allowed.
b. Check lever for corrosion (para 1.49).
c. Check lever bearing hole diameter.
(1) Diameter allowable 0.2965 to 0.2975 INCH-
ES.
GO TO NEXT PAGE
M04-4558-1
1
2