TM 1-1520-238-23
3-109
3.31.
TAIL LANDING GEAR UPPER CAM HOUSING REPAIR – continued
c. Install housing (1) on tail landing gear (2).
Torque two nuts (4) to 140 INCH-POUNDS.
(1) Apply heavy coat of grease to cam (12). Use
grease (item 87, App F).
(2) Place housing (1) over cam (12).
(3) Rotate housing (1) until it reaches lowest ob-
tainable position.
(4) Install two bolts (3).
(5) Hold two bolts (3). Install washers (5) and
nuts (4).
(6) Hold two bolts (3). Torque nuts (4) to 140
INCH-POUNDS. Use torque wrench.
(7) Disengage tail wheel lock (11).
d. Inspect (QA).
END OF TASK
1
2
M04-2345-4
12
M04-2345-5
1
3
2
5
4
11
FULL DOWN
