TM 1-1520-238-23
5-277
5.64.
TAIL ROTOR FORK LOCKING PLATE DISASSEMBLY/ASSEMBLY (AVIM) – continued
5.64.3. Removal
a. Remove locking plate (1) from clamp plates
(2) and (3).
(1) Remove two screws (4) with washers (5) from
plates (2) and (3).
5.64.4. Cleaning
a. Clean clamp plates and locking plate (para
1.47).
5.64.5. Inspection
a. Check plates and locking plate for corrosion
(para 1.49).
b. Check plates and locking plate for cracks,
bends, distortion, or twists. None allowed.
c. Check nutplates on locking plate for loose or
missing rivets or damaged threads. Replace
nutplate (TM 1-1500-204-23).
d. Check plates and locking plate for scratches
and nicks.
(1) Minor scratches and nicks are acceptable
provided that base metal is not exposed
through surface finish.
GO TO NEXT PAGE
M04-3825-1
4
2
5
3
1
