TM 1-1520-238-23
4-115
4.36.
ENGINE BUILDUP – NO. 1 AND NO. 2 ENGINE SHROUD SUPPORT INSTALLATION – continued
4.36.3. Installation
a. Install forward right shroud support (1) on dif-
fuser case flange (2). Torque two nuts (4) to 80
INCH-POUNDS.
(1) Hold bolt (3). Remove nut (4).
(2) Remove nut (4) from stud (5).
(3) Lubricate threads of bolt (3) and stud (5). Use
lubricating oil (item 119, App F).
(4) Position support (1) on bolt (3) and stud (5).
(5) Hold bolt (3). Install nut (4).
(6) Install nut (4) on stud (5).
(7) Hold bolt (3). Torque two nuts (4) to 80 INCH-
POUNDS. Use torque wrench.
b. Install aft right shroud support (6) on power
turbine case flange (7). Torque two nuts (9) to 80
INCH-POUNDS.
(1) Hold two bolts (8). Remove two nuts (9).
(2) Lubricate threads of bolts (8). Use lubricating
oil (item 119, App F).
(3) Position support (6) on bolts (8).
(4) Hold bolts (8). Install nuts (9).
(5) Hold two bolts (8). Torque two nuts (9) to 80
INCH-POUNDS. Use torque wrench.
GO TO NEXT PAGE
3
5
M04-1353-2
4
1
4
5
3
M04-1353-3
2
M04-1353-4
8
9
8
6
7
M04-1353-5
8
9
