TM 1-1520-238-23
4-116
4.36.
ENGINE BUILDUP – NO. 1 AND NO. 2 ENGINE SHROUD SUPPORT INSTALLATION – continued
c. Install aft left shroud support (10) on power
turbine case flange (7). Torque two nuts (12) to
80 INCH-POUNDS.
(1) Hold two bolts (11). Remove nuts (12).
(2) Lubricate threads of bolts (11). Use
lubricating oil (item 119, App F).
(3) Position support (10) on bolts (11).
(4) Hold two bolts (11). Install two nuts (12).
(5) Hold two bolts (11). Torque two nuts (12) to 80
INCH-POUNDS. Use torque wrench.
d. Install forward left shroud support (13) on dif-
fuser case flange (2). Torque three nuts (15) to
80 INCH-POUNDS.
(1) Hold three bolts (14). Remove nuts (15).
(2) Lubricate threads of bolts (14). Use
lubricating oil (item 119, App F).
(3) Position support (13) on bolts (14).
(4) Hold three bolts (14). Torque three nuts (15)
to 80 INCH-POUNDS. Use torque wrench.
e. Inspect (QA).
GO TO NEXT PARAGRAPH
11
M04-1353-6
12
12
7
10
11
M04-1353-7
12
15
14
M04-1353-8
14
13
M04-1353-9
14
15
2
