TM 1-1520-238-23
4-175
4.55.
NO. 2 ENGINE INSTALLATION UPPER CONNECTIONS continued
l. Install cable (39) to load demand spindle gear-
box (40).
(1) Remove cable (39) from lower clip (41).
(2) Install cable fitting (42) on gearbox fitting (43).
(3) Install coupling nut (44).
m. Torque coupling nuts (38) and (44) to 70 INCH-
POUNDS.
(1) Hold flats (45) on cable housings (46) and
(47).
(2) Torque coupling nuts (38) and (44) to 70
INCH-POUNDS. Use torque wrench.
n. Install engine shroud (48).
(1) Position shroud (48) on top of engine (10).
(2) Lock four turnlock fasteners (49).
o. Attach aft connector P22 (50) to receptacle
J22 (51).
p. Attach connector P24 (52) to receptacle J24
(53).
q. Attach wire harness (54) to airframe (55).
(1) Position clamp (56) on harness (54).
(2) Install screw (57) through clamp (56) and
spacer (58) into airframe (55).
GO TO NEXT PAGE
41
39
44
39
43
40
M04-2998-10
42
46
45
47
38
44
M04-2998-11
49
10
48
M04-2998-12
50
M04-2998-13
54
55
53
51
52
58
56
57