TM 1-1520-238-23
Change 2
4-262.1/(4-262.2 blank)
4.81.
NO. 1 ENGINE AIR STARTER REMOVAL/INSTALLATION – continued
b. Install starter (1) on engine (2). Torque four nuts
(5) to 120 INCH-POUNDS.
(1) Aline starter shaft spline (9) with starter drive
spline (11).
(2) Aline slotted holes in flange (10) with nuts (5).
(3) Position starter (1) in place on engine (2).
Turn starter (1) counterclockwise to seat.
(4) Torque four nuts (5) to 120 INCH-POUNDS.
Use torque wrench.
c. Attach connector P35 (3) to starter receptacle
A3 (4).
d. Inspect (QA).
e. Install No. 1 engine regulating valve (para
4.79).
f. Perform power plants maintenance operation-
al check (engine 1) (TM 1-1520-238-T).
g. Secure access door LN1 (para 2.2).
END OF TASK
9
M04-1019-4A
5
2
1
11
10
M04-1019-5
4
3
