TM 1-1520-238-23
4-405
4.128.
NO. 1 AND NO. 2 ENGINE SECONDARY NOZZLE SUPPORT BUSHING REPLACEMENT
(AVIM)
4.128.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
4.128.2. Initial Setup
Tools:
Airframe repairman’s tool kit (item 377, App H)
Personnel Required:
68G
Aircraft Structural Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
References:
TM 1-1500-204-23
NOTE
This task is typical for all nozzle support
bushings.
4.128.3. Removal
WARNING
Fuel deposits on nozzles may be tox-
ic. Use care to prevent cuts from fins
and flanges. If injury occurs, flush
skin with water and seek medical aid.
a. Remove nozzle support pin bushing (1) from
flange (2).
(1) Remove rivets (3) (TM 1-1500-204-23).
(2) Remove and discard bushing (1).
GO TO NEXT PAGE
M04-2617-1
1
2
3
