TM 1-1520-238-23
4-456
Change 4
4.143.
NO. 1 ENGINE LOAD DEMAND SPINDLE GEARBOX REMOVAL/INSTALLATION – continued
b. Remove gearbox (2) from baseplate (7).
(1) Remove bolt (8), two flat washers (9), and
countersunk washer (10).
(2) Remove bolts (11) and (12), two flat washers
(13), and two countersunk washers (14).
(3) Remove gearbox (2).
4.143.4. Cleaning
a. Clean baseplate (para 1.47).
4.143.5. Inspection
a. Check cable for cracked, bent, or loose fitting.
None allowed.
b. Check cable for binding. None allowed.
c. Check cable fitting and exposed baseplate for
corrosion (para 1.49).
d. Check baseplate for nicks or scratches. Maxi-
mum depth not to exceed 0.015 INCH.
e. Check splines for visible nicks or wear. None
allowed.
GO TO NEXT PAGE
M04-1179-5A
2
7
11
14
14
12
8
10
9
13
13
