TM 1-1520-238-23
4-466
4.145.
NO. 1 ENGINE POWER AVAILABLE SPINDLE CENTER CABLE REMOVAL continued
i. Remove rod end (46) from bellcrank (47).
(1) Remove and discard cotter pin (48).
(2) Hold bolt (49). Remove nut (50).
(3) Remove bolt (49) from rod end (46) and bell-
crank (47).
(4) Remove rod end (46).
j. Remove rod end (46) from cable (2).
(1) Hold cable (2) at flats (51). Loosen nut (52).
(2) Remove rod end (46) and nut (52) from cable
(2).
k. Remove cable (2) from bracket (53).
(1) Hold cable (2) at flats (51). Remove nut (54)
and spacer (55) from cable (2).
(2) Pull cable (2) aft until free of bracket (53).
(3) Remove spacer (56) and nut (57).
GO TO NEXT PAGE
M04-1183-16
49
51
2
50
M04-1183-12
48
52
46
47
M04-1183-13
51
57
2
55
54
53
56