TM 1-1520-238-23
4-617
4.176.
NO. 1 ENGINE LOAD DEMAND SPINDLE AFT CABLE REMOVAL – continued
d. Remove aft cable (3) from gearbox (4).
(1) Hold cable flats (5). Remove coupling nut (6).
(2) Remove aft cable fitting (7) from gearbox fit-
ting (8).
e. Remove clamps (9) and (10) from support (11).
(1) Hold two screws (12). Remove two nuts (13)
and washers (14).
(2) Remove two screws (12).
(3) Remove clamp (9) from cable (3).
f. Remove support (11) from firewall (15).
(1) Hold four screws (16). Remove four nuts (17)
and washers (18).
(2) Remove four screws (16) from support (11).
(3) Remove support (11).
g. Remove retainer seal (19) and firewall plate
(20) from louver enclosure (21).
(1) Remove three screws (22) and washers (23).
(2) Slide seal (19) and firewall plate (20) aft on
cable (3).
GO TO NEXT PAGE
8
7
6
5
3
4
M04-1203-3
10
12
9
11
14
M04-1203-4
3
13
16
18
11
15
M04-1203-5
17
16
17
18
15
19
23
22
3
20
21
M04-1203-6
