TM 1-1520-238-23
4-615
4.175.
NO. 1 AND NO. 2 ENGINE POWER AVAILABLE SPINDLE CENTER CABLE SUPPORT
REMOVAL/INSTALLATION – continued
b. Remove support (3) from frame (8).
(1) Hold two screws (9). Remove two nuts (10)
and washers (11).
(2) Remove two screws (9) and washers (12).
4.175.4. Cleaning
a. Clean support mounting area on frame (para
1.47).
4.175.5. Inspection
a. Check support mounting area on frame for
cracks. None allowed.
b. Check frame for corrosion (para 1.49).
4.175.6. Installation
a. Install support (3) on frame (8).
(1) Position support (3) on frame (8).
(2) Install two screws (9) through washers (12),
support (3), and frame (8).
(3) Install two washers (11) and nuts (10) on
screws (9).
b. Install clamps (1) and (2) on support (3).
(1) Aline clamps (1) and (2) under support (3).
(2) Install screw (4) through washer (7), clamps
(1) and (2), and support (3).
(3) Install washer (6) and nut (5) on screw (4).
c. Inspect (QA).
d. Secure access door L200 (para 2.2).
END OF TASK
12
9
8
3
11
10
M04-2506-3
12
9
8
3
11
10
M04-2506-4
M04-2506-5
5
6
2
7
4
1
3
