TM 1-1520-238-23
4-612
Change 1
4.174.
NO. 2 ENGINE POWER AVAILABLE SPINDLE AFT CABLE INSTALLATION – continued
c. Install firewall plate (3) and seal (4) on louver
enclosure (6).
(1) Install plate (3) and seal (4) between angle
(7) and louver (6).
(2) Aline plate (3) and seal (4) with louver (6).
(3) Install two screws (8) through washers (9),
seal (4), and plate (3) in enclosure (6).
(4) Tighten nine screws (10) on angle (7).
d. Install cable (2) on forward cable (11). Torque
nut (12) to 70 INCH-POUNDS.
(1) Install fitting (13) on fitting (14).
(2) Install nut (12) on cable (11).
(3) Hold cable (2) at flats (15). Torque nut (12) to
70 INCH-POUNDS. Use torque wrench and
crowfoot.
e. Install cable (2) on power available spindle
gearbox (16). Torque nut (17) to 70 INCH-
POUNDS.
(1) Install fitting (18) on gearbox fitting (19).
(2) Hold cable (2) at flats (20). Torque nut (17) to
70 INCH-POUNDS. Use torque wrench and
crowfoot.
f. Install clamp (21) on bracket (22).
(1) Install clamp (21) on cable (2).
(2) Install screw (23) through bracket (22) and
clamp (21).
(3) Hold screw (23). Install washer (24) and nut
(25).
GO TO NEXT PAGE
M04-1202-5A
6
7
8
9
4
3
10
2
15
2
12
13
14
M04-1202-6
11
2
1916
18
17
M04-1202-7
20
M04-1202-8
25
22
21
24
23
2
