TM 1-1520-238-23
4-707
4.192.
PILOT POWER QUADRANT PANEL IGNITION LOCK SWITCH REMOVAL/INSTALLATION
(AVIM) continued
b. Depin wire (6) from connector J1 (7).
(1) Identify wire (6).
(2) Depin wire (6) from connector J1 (7)
(TM 55-1500-323-24).
c. Detach wires (8) and (9) from ENG NO. 1 IGN
OVRD switch (10).
(1) Identify wires (8) and (9).
(2) Remove screw (11), lockwasher (12), and
two terminal lugs (13) and (14).
d. Remove MASTER IGN switch (15) from panel
(2).
(1) Remove nut (16) and lockwasher (17). Use
crowfoot.
(2) Pull switch (15) with detached wires (6) and
(8) from panel (2).
4.192.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
4.192.5. Inspection
a. Check mounting surfaces and attaching parts
for cracks. None allowed.
b. Check wires for cuts, cracks, and damaged
connections (TM 55-1500-323-24).
c. Check mounting surfaces and attaching parts
for corrosion (para 1.49).
GO TO NEXT PAGE
9
6
M04-3332 4
7
2
15
8
10
14
13
12
11
M04-3332-5
15
17
6
8
2
16