TM 1-1520-238-23
7-408
7.109.
UTILITY HYDRAULIC TUBING BULKHEAD SUPPORT BRACKET
REMOVAL/INSTALLATION – continued
b. Detach connector P1072 (6) from rotor brake
pressure switch (S88)J1 (7).
c. Remove rotor brake pressure tube (8) from tee
(9).
(1) Hold tee (9). Remove nut (10).
d. Remove tee (9) from bracket (11).
(1) Hold tee (9). Remove nut (12) and washer
(13).
(2) Remove tee (9).
e. Remove utility pump pressure hose (14) from
union (15).
(1) Hold union (15). Remove nut (16).
(2) Hold union (15). Remove nut (17) and washer
(18).
f. Remove bracket (11) from bulkhead (19).
(1) Remove two screws (20), washers (21), and
nuts (22).
(2) Remove bracket (11).
7.109.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
7.109.5. Inspection
a. Check hoses and tubes for nicks, cuts, chaf-
ing, and stripped or damaged threads (para
7.56).
b. Check nuts for nicks, scratches, rounded
flats, and stripped or damaged threads (para
7.56).
c. Check removed and attaching parts for corro-
sion (para 1.49).
GO TO NEXT PAGE
M04-3643-3
8
11
7
6
10
12
13
9
16
18
15
14
M04-3643-4
17
11
20
M04-3643-5
19
22
21
