TM 1-1520-238-23
6-94
Change 5
6.16.
NO. 7 (APU) DRIVE SHAFT AND ANTI-FLAIL SUPPORT REMOVAL/INSTALLATION – continued
c. Install support (1) on engine mount (2). Torque
four bolts (7) to 20 INCH-POUNDS.
(1) Apply a coat of primer to four bolts (7). Use
sealing compound primer (item 146, App F).
(2) Position support (1) on engine mount (2).
Aline bolt holes.
NOTE
Install shims between anti-flail support
and engine mount only if originally re-
moved.
(3) Install shim(s) (9) between support (1) and
engine mount (2).
(4) Install four bolts (7) through washers (8), sup-
port (1), shims(s) (9) if installed, and engine
mount (2).
(5) Torque four bolts (7) to 20 INCH-POUNDS.
Use torque wrench adapter and torque
wrench.
GO TO NEXT PAGE
2
1
M04-0457-6
7
8
9
