TM 1-1520-238-23
Change 1
6-497
6.119.
MAIN TRANSMISSION FLOAT DIVERTER VALVE REMOVAL/INSTALLATION – continued
b. Remove valve (2) from transmission (1).
(1) Identify and cut lead wires (3), (4), (5), and (6)
(TM 55-1500-323-24).
(2) Remove lockwire from four bolts (7), if
installed.
(3) Remove four bolts (7) and washers (8).
(4) Install two jackscrews (9) in jackscrew holes
(10) and tighten.
(5) Remove valve (2) from transmission (1).
(6) Remove and discard three packings (11) from
valve (2).
(7) Remove two jackscrews (9) from valve (2).
6.119.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
6.119.5. Inspection
a. Check transmission for cracks and stripped
threads. None allowed.
b. Check valve for cracks. None allowed.
c. Check valve for cracked, scratched, gouged,
or chipped packing grooves. None allowed.
d. Check valve for elongated bolt holes. None
allowed.
e. Check valve for corrosion (para 1.49).
GO TO NEXT PAGE
M04-502-3
2
1
7
6
5
3
4
M04-502-4
9
1
9
10
9
2
8
7
11
