TM 1-1520-238-23
6-498
Change 8
6.119.
MAIN TRANSMISSION FLOAT DIVERTER VALVE REMOVAL/INSTALLATION – continued
6.119.6. Installation
a. Install valve (2) in transmission (1). Torque four
bolts (7) to 68 INCH-POUNDS.
(1) Lubricate three new packings (11). Use
assembly fluid (item 30, App F).
(2) Install packings (11) on valve (2).
(3) Install valve (2) in transmission (1).
(4) Install four washers (8) and bolts (7).
(5) Torque four bolts (7) to 68 INCH-POUNDS.
Use torque wrench.
b. Connect lead wires (3), (4), (5), and (6).
(1) Cut valve wires (12), (13), (14), and (15) to
correct length.
(2) Connect lead wire (3) to valve wire (12)
(TM 55-1500-323-24).
(3) Connect lead wire (4) to valve wire (13)
(TM 55-1500-323-24).
(4) Connect lead wire (5) to valve wire (14)
(TM 55-1500-323-24).
(5) Connect lead wire (6) to valve wire (15)
(TM 55-1500-323-24).
c. Inspect (QA).
d. Install main transmission (para 6.107).
e. Perform drive system dynamic maintenance
operational check (TM 1-1520-238-T).
END OF TASK
M04-502-6A
1
10
9
2
8
7
11
M04-502-7
3
4
5
6
15
2
12
1
7
14
13
