TM 1-1520-238-23
Change 8
6-523
6.125.
INTERMEDIATE GEARBOX OUTPUT SEAL ASSEMBLY REMOVAL/INSTALLATION – continued
b. Install seal assembly (10) in retainer (1).
(1) Coat outer edge of seal (10) with sealing
compound.
Use
sealing
compound
(item 160, App F) and brush (item 34,
App F).
NOTE
Some retainers have retaining rings.
(2) Install retaining ring (9) on retainer (1), if re-
moved.
(3) Position retainer (1) on a flat surface with
mounting surface up.
(4) Ensure seal (10) is facing up. Install seal (10)
into retainer.
(5) Lubricate new packing (8). Use assembly
fluid (item 30, App F).
(6) Install packing (8) on retainer (1).
(7) Lubricate seal lip with a light coat of grease
(1). Use grease (item 91, App F). and (brush
(item 34, App F)).
(8) Lubricate sealing surface of output gear (11).
Use grease (item 91, App F) and (brush
(item 34, App F)).
GO TO NEXT PAGE
1
M04-2769-10A
10
8
1
M04-2769-11B
8
10
9
