TM 1-1520-238-23
6-524
Change 8
6.125.
INTERMEDIATE GEARBOX OUTPUT SEAL ASSEMBLY REMOVAL/INSTALLATION – continued
CAUTION
Do not move retainer axially away from
gearbox housing before securing, as seal
leakage may result and seal must be
completely removed from retainer and
and reinstalled.
c. Install retainer (1) on gearbox (2). Torque six
nuts (3) to 60 INCH-POUNDS.
(1) Position retainer (1) on studs (5) and spacer
(11).
(2) Install six washers (4) and new nuts (3) on
studs (5).
(3) Torque six nuts (3) to 60 INCH-POUNDS.
Use torque wrench.
(4) Install two nylon setscrews (6) in retainer (1).
d. Inspect (QA).
e. Apply sealing compound to nylon setscrews
(6). Use sealing compound (item 177, App F).
f. Apply bead of sealing compound to joint be-
tween gearbox (2), spacer (11) and retainer (1).
Use sealing compound (item 177, App F).
g. Apply sealing compound to studs (5), nuts (3)
and washers (4). Use sealing compound
(item 177, App F).
h. Inspect (QA).
i. Install intermediate gearbox output shoul-
dered shaft (para 6.122).
END OF TASK
1
3
4
2
5
6
M04-2769-6
11
