TM 1-1520-238-23
6-529
6.127.
INTERMEDIATE GEARBOX MACHINE PLUG REMOVAL/INSTALLATION – continued
6.127.5. Inspection
NOTE
Unless otherwise specified, the following
inspection procedures apply to machine
plug, machine plug recess, and adjacent
surfaces on intermediate gearbox hous-
ing.
a. Check for cracks. None allowed.
b. Check for stripped, crossed, or flattened
threads. None allowed.
c. Check for scratches, nicks, and gouges (para
6.121).
d. Check for corrosion (para 1.49).
6.127.6. Installation
a. Remove protective plug (4) from gearbox (2).
b. Install plug (1) in gearbox (2). Torque plug (1) to
40 INCH-POUNDS.
(1) Lubricate new packing (3). Use assembly
fluid (item 30, App F).
(2) Install packing (3) on plug (1).
(3) Install plug (1) in gearbox (2).
(4) Torque plug (1) to 40 INCH-POUNDS. Use
torque wrench.
c. Inspect (QA).
d. Install access fairing R510 (para 2.2).
END OF TASK
4
2
M04-3795-4
3
2
M04-3795-2
1
