TM 1-1520-238-23
7-36
7.10.
PRIMARY HYDRAULIC PUMP PRESSURE AND RETURN TUBE SUPPORT BRACKET
REMOVAL/INSTALLATION – continued
7.10.3. Removal
a. Remove return hose (1) from union (2).
(1) Place rags under hose (1) to catch hydraulic
fluid spills.
(2) Hold union (2). Remove nut (3). Use open
end wrench.
(3) Hold union (2). Remove nut (4) and washer
(5). Use open end wrench.
b. Remove pressure hose (6) from bracket (7).
(1) Remove screw (8) and washer (9) from
bracket (7) and clamp (10).
(2) Push hose (6) away from bracket (7).
c. Remove bracket (7) from fitting (11).
(1) Remove two nuts (12), washers (13), and
screws (14).
(2) Remove bracket (7) from fitting (11) and
union (2).
7.10.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
7.10.5. Inspection
a. Check tubes, hoses, union, and fitting for
nicks, scratches, chaffing, and stripped or
damaged threads (para 7.1).
b. Check removed and attaching parts for corro-
sion (para 1.49).
GO TO NEXT PAGE
M04-3584-2
5
4
3
1
8
9
6
10
7
2
M04-3584-3
2
11
14
13
12
13
7
