TM 1-1520-238-23
7-37
7.10.
PRIMARY HYDRAULIC PUMP PRESSURE AND RETURN TUBE SUPPORT BRACKET
REMOVAL/INSTALLATION – continued
7.10.6. Installation
a. Install bracket (7) on fitting (11).
(1) Install bracket (7) over union (2).
(2) Install two screws (14) through fitting (11) and
bracket (7).
(3) Install two washers (13) and nuts (12) on
screws (14).
b. Install hose (6) on bracket (7).
(1) Aline clamp (10) with bracket (7).
(2) Install screw (8) and washer (9) through
clamp (10) on bracket (7).
c. Install hose (1) on union (2).
(1) Hold union (2). Install washer (5) and nut (4)
on union (2). Use open end wrench.
(2) Lubricate threads of union (2). Use clean
hydraulic fluid (item 92, App F).
(3) Hold union (2). Install nut (3). Use open end
wrench.
d. Inspect (QA).
e. Bleed primary hydraulic system (para 1.35).
f. Service primary hydraulic system (para 1.34).
g. Perform hydraulic system leak check (para
7.2).
h. Install access panel L200 (para 2.2).
END OF TASK
M04-3584-4
2
11
14
13
12
13
7
M04-3584-5
5
4
3
1
8
9
10
6
7
2
