TM 1-1520-238-23
7-98
7.28.
HYDRAULIC HAND PUMP SUPPORT REPLACEMENT – continued
7.28.5. Inspection
a. Check removed and attaching parts for nicks,
dents, cracks, and stripped or damaged
threads (para 7.1).
b. Check removed and attaching parts for corro-
sion (para 1.49).
7.28.6. Installation
a. Install support (1) on pump (2).
(1) Aline support (1) between pump lugs (11).
(2) Install one washer (7) on each side of support
(1) between support (1) and lugs (11).
(3) Install bolt (5).
(4) Aline support (1) between bellcrank lugs (12).
(5) Install one washer (10) on each side of sup-
port (1) between support (1) and lugs (12).
(6) Install bolt (8).
(7) Install nut (9) on bolt (8) until bushings (13)
are just clamped. Continue tightening until
cotter pin hole is alined.
(8) Install new cotter pin (4).
(9) Install nut (6) on bolt (5) until bushings (14)
are just clamped. Continue tightening until
cotter pin hole is alined.
(10) Install new cotter pin (3).
b. Inspect (QA).
c. Install hydraulic hand pump selector lever
and spring (para 7.29).
d. Install hydraulic hand pump (para 7.25).
END OF TASK
10
M04-2661-2
10
4
9
1
7
5
2
36
11
14
13
8
12
