TM 1-1520-238-23
7-124
7.35.
DIRECTIONAL SERVOCYLINDER BUCS WARNING PLATE REPLACEMENT
7.35.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
7.35.2. Initial Setup
Tools:
Aircraft mechanics tool kit (item 376, App H)
Light duty laboratory apron (item 27, App H)
Chemical protective gloves (item 154, App H)
Adjustable air filtering respirator (item 262, App H)
3/16-inch hexagon x 1/4-inch drive screwdriver socket
wrench attachment (item 322, App H)
30 - 150 inch-pound 1/4-inch drive click type torque
wrench (item 435, App H)
Materials/Parts:
Adhesive (item 6, App F)
Wire (item 226, App F)
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
2.2
Access fairing L540 removed
7.35.3. Removal
a. Remove armor plate (1) from actuator (2).
(1) Remove lockwire from three bolts (3).
(2) Remove three bolts (3), three washers (4),
and standoff (5) from actuator (2). Use
hexagon screwdriver.
(3) Remove armor plate (1).
b. Remove and discard warning plate (6) from
armor plate (1).
7.35.4. Cleaning
a. Clean adhesive from armor plate (para 1.47).
GO TO NEXT PAGE
M04-3729-1
M04-3729-2
2
5
1
6
4
3
