TM 1-1520-238-23
7-120
Change 7
7.34.
DIRECTIONAL SERVOCYLINDER ROD END REPLACEMENT – continued
d. Remove rod end (7) from bellcrank (8).
(1) Remove and discard cotter pin (9).
(2) Hold bolt (10). Remove nut (11).
(3) Remove washer (12), bushing (13), bolt (10),
and pin (14).
(4) Remove rod end (7).
e. Measure and record distance A between cen-
ter of rod end bore (15) and top (16) of piston
rod (2).
f. Remove piston rod end (7) with nut (5) and
lock (3) from piston rod (2).
g. Remove lock (3) and nut (5) from piston rod
end (7).
GO TO NEXT PAGE
M04-777-3A
8
7
9
11
12
13
14
10
M04-777-9A
16
A
2
15
5
3
7
M04-777-4A
2
5
3
7
