TM 1-1520-238-23
7-202
7.48.
LONGITUDINAL SERVOCYLINDER INSTALLATION – continued
i. Install rod end (17) on control arm (18). Torque
nut (20) 30 to 40 INCH-POUNDS.
(1) Install bolt (19) through arm (18) and rod end
(17).
(2) Check fit of self-retaining bolt (19) (para
11.1).
(3) Hold bolt (19).
(4) Install nut (20).
(5) Torque nut (20) to 30 INCH-POUNDS. Use
torque wrench.
(6) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(7) Install new cotter pin (21).
CAUTION
Ensure tubes are not crossed when
installed.
j. Install utility pressure tube (22) on adapter
(23).
(1) Lubricate threads on adapter (23). Use clean
hydraulic fluid (item 92, App F).
(2) Install nut (24).
k. Install utility return tube (25) on adapter (26).
(1) Lubricate threads on adapter (26). Use clean
hydraulic fluid (item 92, App F).
(2) Install nut (27).
GO TO NEXT PAGE
18
21
19
20
M04-826-12
17
M04-826-10
25
22
24
26
2723
