TM 1-1520-238-23
7-203
7.48.
LONGITUDINAL SERVOCYLINDER INSTALLATION – continued
l. Install tube clamp (28). Torque screw (29) to 23
INCH-POUNDS.
(1) Position one half of clamp (28) between ser-
vocylinder (3) and tubes (22) and (25). Posi-
tion other half of clamp (28) over tubes (22)
and (25) and aline mounting holes.
(2) Install screw (29) with washer (30).
(3) Torque screw (29) to 23 INCH-POUNDS. Use
hexagon screwdriver and torque wrench.
m. Install primary pressure tube (31) on adapter
(32).
(1) Lubricate threads on adapter (32). Use clean
hydraulic fluid (item 92, App F).
(2) Install nut (33).
n. Install primary return tube (34) on adapter
(35).
(1) Lubricate threads on adapter (35). Use clean
hydraulic fluid (item 92, App F).
(2) Install nut (36).
o. Install wire harness (37) and tube clamp (38).
Torque screw (39) to 23 INCH-POUNDS.
(1) Position half of clamp (38) between servocy-
linder (3) and tubes (31) and (34).
(2) Position other half of clamp (38) over tubes
(31) and (34) and aline mounting hole.
(3) Install clamp (40) on wire harness.
(4) Aline clamp (40) with clamp (38) mounting
holes.
(5) Install screw (39) with washer (41).
(6) Torque screw (39) to 23 INCH-POUNDS. Use
hexagon screwdriver and torque wrench.
GO TO NEXT PAGE
22
28
29
25
30
3
M04-826-11
M04-826-13
35
36
34
31
32
33
37
M04-826-14
40
31
3
38
39
34
41
