TM 1-1520-238-23
8-71
8.26.
CPG ENGINE INSTRUMENTS DIMMER POWER SUPPLY CONNECTOR
REPLACEMENT – continued
8.26.5. Inspection
a. Check receptacle mounting area for cracks;
check internal wiring and components for
damage. None allowed.
b. Check receptacle mounting area for corrosion
(para 1.49).
8.26.6. Installation
a. Install connector (1) in power supply (2).
(1) Pin six wires (10) on connector (1)
(TM 55-1500-323-24).
(2) Position connector (1) with keyway at 12
o’clock on power supply (2). Install four
screws (7) and washers (8).
(3) Install tiedown strap (9) on wires (10) leading
to connector (1). Use strap (item 193, App F).
b. Perform continuity test. Use multimeter
(TM 55-1500-323-24).
c. Install cover (6) on power supply (2).
(1) Position cover (6) on power supply (2).
(2) Install six screws (4) and washers (5) on top
side of power supply (2).
(3) Install seven screws (3) on front of power
supply (2).
d. Inspect (QA).
e. Install CPG engine instruments dimmer power
supply (para 8.25).
END OF TASK
10
1
9
M04-3909-3
M04-3909-4
4
6
2
1
7
3
8
5
