TM 1-1520-238-23
Change 3 8-67
8.24.
PILOT/CPG ENGINE INSTRUMENT DIM/TEST CONTROL PANEL FRONT PANEL
REMOVAL/INSTALLATION (AVIM) – continued
8.24.6. Installation
a. Install panel (1) on case (2). Torque two bush-
ings (6) to 24 INCH-OUNCES.
(1) Lubricate two bushings (6). Use lubricant
(item 115, App F).
(2) Position panel (1) mounting holes on case (2)
threaded holes.
(3) Install two bushings (6).
(4) Torque bushings to 24 INCH-OUNCES. Use
screwdriver bit and torque wrench.
b. Install knob (4) on shaft (5).
(1) Tighten setscrew (3). Use socket head key
set.
c. Inspect (QA).
d. Perform appropriate test. Use Electronic Equip-
ment Test Facility (EETF) (TM 11-6625-3085-30).
END OF TASK
M04-2772-2
6
1
3
4
6
2
5
